
When you decide to restore a classic off-roader, the Jeep CJ5 body tub is often the first thing you need to inspect for rust. A solid jeep cj7 body tub serves as the backbone for your entire build. If your current metal is more holes than steel, you might need a full replacement from a trusted source like Vintage Jeeps, Inc. Finding a high-quality Jeep CJ5 body tub or a Jeep CJ7 body tub can save you hundreds of hours of welding.
What Is a Jeep Body Tub?
A body tub is the main shell of your Jeep. It includes the floor, side panels, and the rear area. It does not include the hood, fenders, or grill. Think of it as the “bucket” that you sit in while driving. For many old Jeeps, these tubs have seen decades of mud and snow. Water gets trapped in the seams. Eventually, the metal thin out and turns into iron oxide.
When the damage gets too bad, patching isn’t enough. You have to replace the whole thing. This is a big job. It requires moving your dash, seats, and wiring over to the new shell. But a new tub gives your Jeep a second life. It makes the vehicle safe and sturdy again.
Meet Vintage Jeeps, Inc
Vintage Jeeps, Inc specializes in providing high-quality parts for classic military and civilian Jeeps. They offer everything from small bolts to full body panels to help enthusiasts keep history on the road. You can find their full catalog at https://www.vintagejeepparts.com/.
The Jeep CJ5 Body Tub: A Close Look
The CJ5 had a very long production run. It started in 1954 and went until 1983. Because it was made for so long, not all tubs are the same. Early models used different floor patterns than later ones.
Pros of the CJ5 Tub
-
It has a classic, short-wheelbase look.
-
The curved entryways are iconic.
-
It fits into tight spots on narrow trails.
-
New steel tubs are often thicker than the original factory metal.
Cons of the CJ5 Tub
-
Space is very limited inside.
-
The short door openings make it hard to get in and out.
-
Mounting points changed in 1976. You must know your Jeep’s year before ordering.
Real-World Insight
If you are over six feet tall, the CJ5 feels cramped. Most owners move the seat brackets back just to fit. When you buy a Jeep CJ5 body tub, check the fuel filler location. Some are on the side, while others are at the rear. Vintage Jeeps, Inc can help you identify which version matches your chassis.
The Jeep CJ7 Body Tub: The Versatile Choice
In 1976, Jeep introduced the CJ7. They wanted to fix the complaints people had about the CJ5. The biggest change was the length. The CJ7 is ten inches longer than the CJ5. This extra space changed everything for Jeep owners.
Pros of the CJ7 Tub
-
The door openings are squared off. This allows for full hard doors.
-
There is much more legroom in the back seat.
-
The longer wheelbase makes the ride smoother on the highway.
-
It is easier to find tops and accessories that fit this tub.
Cons of the CJ7 Tub
-
It is heavier than the CJ5 version.
-
The longer body can “high-center” more easily on big rocks.
-
Rust still loves to hide in the support channels under the floor.
Technical Note
The Jeep CJ7 body tub is a favorite for people who want a daily driver. You can actually fit a cooler and some gear behind the rear seat. That is almost impossible in a CJ5. If you plan on taking family trips, the CJ7 is the way to go.
Comparing the Two Tubs
It is easy to get these two confused if you are new to the hobby. Here is a simple breakdown of the differences.
Size and Dimensions
The CJ5 tub is roughly 10 inches shorter. This length is missing from the door area and the rear floor. If you look at the side of a Jeep CJ5 body tub, you will see a “U” shaped cutout for the door. On a Jeep CJ7 body tub, that opening looks more like a square with rounded corners.
Component Compatibility
You cannot swap a CJ5 tub onto a CJ7 frame without massive fabrication. The body mounts do not line up. The driveshafts are different lengths too. Always buy the tub that matches your frame. If you are starting a build from scratch, decide on your frame first.
What to Look for When Buying a New Tub
Buying a body tub is a major investment. You should not just buy the cheapest one you find. Quality matters when it comes to steel.
Gauge of Steel
Original Jeep tubs were often made of thin metal. Many replacement tubs use 18-gauge steel for the sides. They use 16-gauge steel for the floors. This makes the Jeep feel more solid. It also helps the body resist dents.
Prime and Prep
Most tubs arrive in a black primer. This primer is only meant to prevent rust during shipping. You must scuff it and apply a real epoxy primer before painting. If you skip this, your fancy paint job will peel off in a year.
Pre-Drilled Holes
Some tubs come with every hole drilled. Others come “blank.” A blank tub is actually better for custom builds. It lets you put your lights and mirrors exactly where you want them. But be ready to spend a lot of time with a drill bit.
Installation Tips from the Pros
Replacing a tub is a “body-off” restoration step. You will need a few friends or a hoist. A bare steel tub weighs about 300 to 400 pounds.
Check Your Body Mounts
Don’t put a brand-new Jeep CJ7 body tub on old, rotted rubber mounts. Buy a new polyurethane or rubber mounting kit. This will keep the body aligned and reduce vibration.
Grounding Issues
Steel tubs need a good ground for the electrical system. Since the tub is painted, the lights might not work at first. You may need to grind a tiny bit of paint away where the ground wires attach. Or, run a dedicated ground wire to the frame.
Test Fit Everything
Before you paint the tub, bolt everything onto it. Put the steering column in. Mount the pedals. Fit the tailgate. Sometimes you need to move a hole by a fraction of an inch. It is much easier to do this on raw steel than on a fresh paint job.
Why Choose Vintage Jeeps, Inc?
When you are deep into a project, you need experts. Vintage Jeeps, Inc knows these vehicles inside and out. They don’t just sell parts; they understand how they fit together. This expertise is vital when you are trying to figure out why your 1974 fender doesn’t line up with your new tub.
Maintenance for Your New Tub
Once your Jeep is back on the road, you want it to last. Steel is strong, but nature is stronger.
-
Use a bedliner material on the inside floor. This prevents your boots from scratching the paint.
-
Wash the underside of the Jeep after driving in mud or salt.
-
Check the drain holes in the floor. Ensure they aren’t plugged with dirt.
-
Apply a wax or sealant to the paint twice a year.
Final Verdict
If you want a nimble, classic trail machine, stick with the Jeep CJ5 body tub. It represents the original spirit of the civilian Jeep. It is perfect for solo trips or short hops around town.
If you want a Jeep that can do it all, go with the Jeep CJ7 body tub. The extra space makes it much more usable. It handles better at high speeds. It also accommodates modern upgrades like fuel injection and larger seats more easily.
Both models are legends. Replacing a rotted tub is the best way to ensure your Jeep stays on the trails for another fifty years. Start your journey by checking the resources at Vintage Jeeps, Inc. They have the parts you need to turn a rusty frame into a show-stopper.
For more technical details on specific years, see page 42 of the official service manual.

